machined surface
英 [məˈʃiːnd ˈsɜːfɪs]
美 [məˈʃiːnd ˈsɜːrfɪs]
n. （已）加工表面
双语例句
- Influence of Scallop Height by High-speed Milling on Machined Surface Roughness
高速铣削残留高度对加工表面粗糙度的影响 - The quality of the machined surface obtained by up milling is not very high.
通过逆铣所得机加工表面质量不是很高。 - The advantages of this method include higher quality of the machined surface and easier clamping of workpieces, since the cutting forces act downward.
这种方法的优点包括机加工表面质量较高和工件由于切削力向下作用而较容易夹紧。 - With the X-ray stressmeasurer, the residual stress of machined surface was measured when aluminum alloy be fine-cutted by cemented carbide on different cutting condition.
用X射线应力测量仪测量了不同切削条件下铝合金工件表面的残留应力。 - Depth of cut, d, is the normal distance between the unmachined surface and the machined surface.
切削深度d是未加工面与已加工面之间的垂直距离。 - The device is also equipped with abrasive tools for grinding the machined surface.
该设备还安装有磨削加工面的磨具。 - Analyzing Machined Surface Roughness Based on Turn-milling
基于车铣复合加工的已加工表面粗糙度分析 - Comparison of Ultra-Precision Machined Surface Roughness Measurement Methods and Power Spectral Density Characterization
超精密加工表面粗糙度测量方法对比及功率谱密度评价 - Feature Extraction of Machined Surface Texture for Tool Wear Monitoring Based on Hough Transform
基于Hough变换的刀具磨损监测加工表面纹理特征提取 - At realm of surface roughness of machined surface, forecast mathematical model is set up by using quadratic regression orthogonal design between NC turning parameter and machined surface.
在已加工表面粗糙度研究领域引入回归正交分析，采用多元二次回归正交设计得到了数控车削参数与已加工表面粗糙度的回归预报模型。 - The device is provided with an electric appliance which can regulate the time of pushing bar movement and thereby controlling the processing time of each machined surface.
该设备安装有可随意调节推杆运动的时间间隔进而决定每个加工面的加工时间的电器； - Research on the Effect of Material Anisotropy on the Machined Surface Quality in Diamond Cutting of KDP Crystals
材料各向异性对KDP晶体加工表面质量影响研究 - The clearance angle is provided such that the tool will not rub the machined surface thus spoiling the surface and increasing the cutting forces.
后角使刀具不产生会损坏机加工面的摩擦和增加切削力。 - The selection of distance between tool feeds has a great influence on machined surface roughness either in3-coordinates or2-coordinates linked millings.
无论是三坐标还是两坐标联动铣削，走刀行距的选择对加工表面粗糙度都有很大影响。 - Research and Application of Fatigue Notch Factor of Machined Surface
考虑表面加工的疲劳缺口系数研究与应用 - Influence of Undeformed Chip Thickness on Surface Roughness-Spectral Analysis of the Profile of Machined Surface
切削厚度对加工粗糙度的影响&已加工表面轮廓的谱分析 - The force and temperature of polycrystalline diamond grinding with diamond wheel are tested and analyzed, the machined surface is investigated with scanning electron microscope.
首先对金刚石砂轮磨削加工聚晶金刚石的磨削力和磨削温度进行了测试和分析，利用扫描电镜对工件加工表面进行了微观分析研究。 - Machined Surface morphology of particle-reinforced metal matrix composites is analyzed in this paper.
分析了颗粒增强金属基复合材料的加工表面形貌特点。 - Meanwhile characteristics of the damage zone under the machined surface are analyzed.
还研究了已加工表面下破坏区的特征。 - This paper made a study of theoretical roughness of surface on machined surface by high-speed lapping with solid abrasive, and of the relationship between machined surface roughness, micro-topography and parameters of lapping.
对固着磨料高速研磨工件已加工表面理论粗糙度进行了探讨，并对工件已加工表面粗糙度、微观形貌与研磨加工中各工艺参数之间的关系进行了研究。 - The machined surface of zirconia toughened mullite obtained by grinding, honing and flat-top honing were studied.
本文应用表面粗糙度参数和磨损率，研究增韧莫来石材料磨削、珩磨及平顶珩磨表面的耐磨性能。 - The theoretical roughness of machined surface of common metal materials can be calculated using the current formula.
普通金属材料的切削加工理论表面粗糙度可以用公式计算。 - The machined surface texture and roughness of composites reinforced by fiber are closely related to the cutting direction.
纤维增强复合材料的切削加工表面结构和粗糙度与切削方向密切相关。 - The cutting force and machined surface quality during high speed milling a typical Al alloy C shape workpiece are experimental investigated.
对高速铣削典型铝合金框架结构工件时的切削力和加工表面质量进行了试验研究。 - The value of tool wear in ultrasonic vibration cutting of different work-piece has been tested and compared with the experimental results in conventional cutting; Also the influence of tool rake angle and tool nose radius on machined surface roughness in ultrasonic vibration cutting has been researched.
实测了超声波振动切削不同工件材料时的刀具磨损值，并与普通切削试验结果进行了对比；同时研究了超声振动切削时刀具前角和刀尖圆弧半径对切削表面粗糙度的影响。 - Cutting parameters have great influences on machined surface quality.
切削参数对加工表面质量有很大影响。 - Tool failure influences tool life and machined surface quality directly, and influences machining cost and machining efficiency.
刀具损坏直接影响到刀具的使用寿命和已加工表面质量，在实际生产中影响加工成本和加工效率。 - And the influences of machine vibration and tool wear on machined surface roughness were researched.
研究了不同切削参数下机床振动情况及不同冷却条件下刀具磨损对粗糙度的影响。 - The solution of a certain pressure scour the surface slag, and reduce the machined surface roughness.
同时利用一定压力的腐蚀介质溶液对激光加工面的熔渣等进行冲刷和腐蚀，降低加工面的粗糙度。 - Studying machined surface topography is one of the important research topics in surface science.
开展对加工表面形貌的研究是表面科学中重要的研究课题之一。